LogTemp Version history

LogTemp Version history

  • Version 2.25.0.97  21 Aug 2011
    • xAP messages withdrawn
    • Corrected Min/Max values when Fahrenheit is set
    • Corrected settings for counter (DS2423) properties
    • Corrected DS276x reading in Windows 7 environment
    • Corrected DS2438 reading for combined sensors (e.g. Hum+Sun) when another sensor fails
    • Corrected CSV-file columns compared to header line
    • Setup form redesigned
    • Changed  FTP timer to compatible with other timers (x times measuring interval)
      • Check your FTP timer now
    • Added timer for MySQL. If used, measurements will cached until timer event, then sent all
    • Added TIMEZONE_BIAS_UTC to XML-file, difference between UTC and Local time
    • Added TemperatureGroups (three) for temperature measurements. Each group has own graphs
    • Minor adjustments
  • Version 2.24.0.92  04 Oct 2009
    • Added support for UV Index Meter by Hobby-Boards, also graphs
    • Added own temperature correction for HIH-4010 humidity sensor
    • Corrected XML settings (disabled)
    • MySQL data saved with two decimals instead of one decimal
    • Counter readings enhanced when reading both pages from the same chip
    • Changed sensor number in xAP messages in order to have always the same number if possible
    • Minor adjustments
  • Version 2.23.0.90  11 May 2009
    • Added own temperature correction for HIH-4000 humidity sensor
    • Fixed calculation for average (H24) values
  • Version 2.22.0.89  11 Apr 2009
    • Service release, no new features
    • Fixed Energy Counter selection visibility for DS2423 sensor
    • Changed max value for pulses / kWh, was 6000 and now is 32000 pulses / kWh
  • Version 2.22.0.88  05 Apr 2009
    • Added Energy Consumption (kWh) Counter with DS2423 chip
    • Day/week/month Energy pictures with line or bar graph
    • Added DailyHTML file (daily last.htm)
    • Added xAP reporting with TSC schema (http://www.xapautomation.org)
    • Increased max picture size from 800x800 to 2k x 2k
    • Changes to program/sensor settings will be saved right away
    • Minor adjustments
  • Version 2.21.0.78  20 Jan 2008
    • MySQL datetime field also possible as UTC
    • Added Solar + VAD sensortype for DS2438
    • Added possibility to confirm program closure
    • Added possibility to send 10 own FTP files
    • Corrected ocassional excessive CPU load
    • Minor adjustments
  • Version 2.20.0.73  25 Nov 2007
    • FTP dataport can be assigned via logtemp.ini file, if computer has several simultaneous ftp programs. Define port range as follows:
      [FTP]
      DataPortRangeStart=5000
      DataPortRangeEnd=5999
    • Corrected history data reading
    • Corrected event scheduling when Daylight Saving Time changes
    • Expanded manual scaling for thermocouples
    • Corrected MySQL saving, was stopping after first error
    • File size limit now max 400 000 lines, was 100 000
    • Minor adjustments
  • Version 2.19.0.70  28 Jun 2007
    • Support for thermocouples (E, J, K, R, S and T type) using DS2760
    • Support for DS2760 internal temperature measuring
    • DS2438 Vsens negative values removed
    • Added 15 and 30 sec measuring intervals
    • Corrected MySQL password saving
  • Version 2.18.0.66  24 May 2007
    • Corrected events scheduling when using Fixed times
    • New correction to DS2438 Vsens negative values
  • Version 2.18.0.65  14 May 2007
    • Support for DS2406 switches, can be used for alarm events
    • Less overhead with MySQL. Error messages also saved (SQL script)
    • More definitions for last.htm, also validation can be added
    • DS2423 absolute values shown in the list
    • Corrected Fahrenheit virtual sensor
    • Corrected month values when measuring only during some days
    • Corrected DS2438 Vsens negative values
    • Minor adjustments
  • Version 2.17.0.64  14 Jan 2007
    • Support fo MySQL™ database
    • MySQL servers 3.xx/4.x/5.x supported
    • No MySQL libraries (libmysql.dll) are required
    • Support for DS2438 voltage measurements (VAD)
    • Support for DS2405 switches, can be used for alarm events
    • Absolute or difference values for DS2423 counter
    • Minor adjustments
  • Version 2.16.0.61  02 Dec 2006
    • MySQL test version, works until 31 Jan 2007.
    • Measurements can be saved to MySQL™ database
    • MySQL servers 3.xx/4.x/5.x supported
    • No MySQL libraries (libmysql.dll) are required
    • Minor adjustments
  • Version 2.15.0.59  01 Apr 2006
    • Support for DS2409 based 1-Wire hubs, only one level
    • Selection of picture time scale improved
    • Day, Week and Month pictures saved for all types
    • Picture title optional
    • FTP tranfer moved to background process
    • FTP BandWidth can be controlled
    • Improved FTP server directory selection
    • RSS feed from last measurements
    • Method of reading of sensors changed
    • DS2423 counter page can be selected
    • Error list can be cleared
  • Version 2.14.0.50  29 Jan 2006
    • Service release, no new features
    • Corrected scaling of the saved pictures
  • Version 2.14.0.48  12 Dec 2005
    • Service release, no new features
    • Corrected size of the saved pictures
  • Version 2.14.0.47  11 Dec 2005
    • Service release, no new features
    • Corrected scaling of the saved pictures
    • Corrected DS1820 family (1820, 18S20 and 1920) negative temperature calculations. Calculated value was 0.5° C too low.
  • Version 2.14.0.46  04 Dec 2005
    • Added support for barometer (DS2438 + MPX4115A, Bitson model from www.hobby-boards.com)
    • Added support for combined humidity and solar radiation detector
    • Added support for DS2423 subtype: general counter, anemometer or rain gauge. Supported anemometer is AAG's 1-Wire Wind Instrument (ver 3.0) There is no picture (yet) generated from these values
    • There is only one picture with selectable time scale for temperatures shown. Day, week and month temperatures can be saved at the same time
    • Sensor list has units for each sensor in a separate column
    • Measuring events can be adjusted also to the fixed times, i.e. 20 min interval and events at 00:00, 00:20, 00:40, 01:00 etc. Fixed times are allways based on 00:00
    • Alarm email message can have sensor name and value in message SUBJECT
    • FTP password will be saved without encryption due to several problems
    • Correction to DS2438 temperature measuring for spikes
    • Correction for reading big *.txt files for sensor history
    • Enhanced error messages for 1-Wire network problems
    • Minor adjustments
  • Version 2.13.0.43  12 Jul 2005
    • Added support for DS2423 counters. These can be used for Lightning Detectors etc. There is no picture (yet) generated from these values
    • Added possibility send alarm messages via email. LogTemp sends alarm messages to SMTP Server. Several send profiles can be defined
    • Email support can be used also for sending text messages (SMS) to mobile (GSM) phones. LogTemp has native support for two internet based commercial SMS gateways, Clickatell and PsWin. You need to open an account with the gateway before sending SMS messages. More information about the prices etc. can be found from those pages
    • Improved FTP performance
    • Minor adjustments
  • Version 2.12.0.42  05 Jun 2005
    • Service release, no new features
    • Changed BINARY/ASCII identification for FTP transfer
    • Corrected activation of OK button for settings dialog
  • Version 2.12.0.39  29 May 2005
    • Added support to Solar Radiation (DS2438 + photodiode) Radiation is measured in mill volts and shown in percent (max 250 mV). Results will be show'n in humidity graph
    • Added Dew point calculation for humidity sensors
    • Added support for temperature measurements for DS2438 sensors.
    • Sensor list will identify each sensor with one character in the beginning of the row. (T=Temperature, H=Humidity, S=Solar radiation)
    • Subtype for each DS2438 sensor must be defined (humidity or solar). All unknown sensors will added to list where they can be picked via menu or via right mouse click
    • List of alarming sensor will be show'n only when needed
    • Supported (for searching) sensor types can be selected via setup.
    • Added encoding selection for XML file
    • Minor adjustments
  • Version 2.11.0.38  10 Apr 2005
    • Corrected FTP password saving. NOTE: Set password before
      first transfer
    • Added support to DS2438 + HIH 3610 based humidity sensors
    • Humidity picture for day, week or month
    • Added last.csv and last.xml files
    • Columns for csv and xml files can be defined
    • Month and Day also using short names for titles
    • Minor adjustments
  • Version 2.10.0.37  22 Aug 2004
    • Added FTP Client
    • Added table definitions for last.htm file
    • Minor changes
  • Versions 2.8 - 2.9
    • Beta testing with FTP Client
  • Version 2.7.0.31  23 Mar 2004
    • Service release, no new features
    • Correction to some ini-file settings
  • Version 2.7.0.30  15 Mar 2004
    • Error-correction parameters for each sensor
    • Title fonts and location can be changed
    • Correction to save manual scaling
    • Correction to Alarms-list update
    • More error checking to html-file save method
    • Minor changes
  • Version 2.6.0.29  29 Feb 2004
    • Alarm limits defined for sensors. Command with parameters and/or sound file to run can be defined for alarm
    • Colours can be changed
    • Scaling can be set manually
    • Virtual sensors. Shows difference between two (hard) sensors
    • More error checking to picture saving method
    • Minor changes
  • Version 2.5.0.28  18 Jan 2004
    • Correction to DS18B20 and DS1822 negative temperature calculations
    • History line in the week picture starts from divider
    • Small layout changes
  • Version 2.4.0.27  5 Jan 2004
    • Correction to Week picture, one day offset after the year has changed
  • Version 2.4.0.26  5 Jan 2004
    • Correction to read history data when year has changed
  • Version 2.4.0.25  15 Dec 2003
    • Support to externally powered sensors
    • Error messages can be saved
    • Correction to save sensor properties, history line
  • Version 2.3.0.24  02 Dec 2003
    • Program localized using the external lng-language file
    • Some small layout changes
    • Average value (H24) calculated
    • The units can be changed to Fahrenheit (normally Celsius)